Проблемы с Записью Cd-R
Думаю у многих не только у меня была или есть такая проблема...
Я не могу записать CD-R, CD-RW пишет норрмально никаких ошибок как только пробую писать CD-R сразу вылетает ошибка вот лог Nero
Код:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25.02.2006 14:11:31
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25.02.2006 14:11:31
Версия Nero: 6.3.1.15 (Nero Express)
Рекордер: <SONY CD-RW CRX175E2> Версия: S002 - HA 1 TA 1 - 6.3.1.15
Драйвер адаптера: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY CD-RW CRX175E2 >Версия: S002 - HA 1 TA 1 - 6.3.1.15
Драйвер адаптера: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP1614N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX175E2 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX175E2 D: CDRom0
NERO IMAGEDRIVE2 F: CDRom1
Generic STEALTH DVD E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 206MB (211364kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.2.2006
CD-ROM (ISO)
14:16:01 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
14:16:01 #2 Phase 90 File dlgbrnst.cpp, Line 1845
Защита опустошения буфера активна
14:16:01 #3 Text 0 File Reader.cpp, Line 118
Reader running
14:16:01 #4 Text 0 File Writer.cpp, Line 124
Writer SONY CD-RW CRX175E2 running
14:16:01 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
14:16:01 #6 Text 0 File Burncd.cpp, Line 3167
Turn on Track-at-once, using CD-R/RW media
14:16:03 #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 358656 ( 79:44.06)
14:16:03 #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
14:16:03 #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: SONY CD-RW CRX175E2;
CDR code: 00 97 26 26; OSJ entry from: SKC Co., Ltd.
ATIP Data:
Special Info [hex] 1: C0 00 80, 2: 61 1A 1A (LI 97:26.26), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
14:16:03 #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
14:16:03 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 358657 (358657) = #358657/79:42.7
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358655 blocks [SONY CD-RW CRX175E2 ]
--------------------------------------------------------------
14:16:03 #12 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [SONY CD-RW CRX175E2 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734836736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
358657 | lead-out | 1 | 0x00 | 0x41
14:16:03 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 358657 -> 358655.
14:16:03 #14 CDR -1202 File DriveLocker.cpp, Line 683
Диск используется IMAPI
SONY CD-RW CRX175E2\H1 T1
14:16:03 #15 Phase 24 File dlgbrnst.cpp, Line 1845
Старт кэширования файлов
14:16:03 #16 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.
14:16:03 #17 Phase 25 File dlgbrnst.cpp, Line 1845
Кэширование файлов завершено
14:16:03 #18 Phase 36 File dlgbrnst.cpp, Line 1845
Старт прожига на 12x (1 800 Кб/с)
14:16:03 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
14:16:03 #20 Text 0 File Mmc.cpp, Line 20239
Set BUFE: supported -> ON , Generic write control : ON
14:16:15 #21 SCSI -1152 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05160000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0
14:16:15 #22 CDR -1152 File Writer.cpp, Line 304
Ошибка скорости диска
14:16:15 #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:16:15 #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
14:16:15 #25 CDR -201 File WriterStatus.cpp, Line 196
Неправильное состояние записи
SONY CD-RW CRX175E2\H1 T1
14:16:15 #26 TRANSFER -18 File WriterStatus.cpp, Line 196
Не могу выполнить EndTrack
14:16:15 #27 Text 0 File Mmc.cpp, Line 15064
<SONY CD-RW CRX175E2 > start Close Session
14:16:15 #28 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04
14:16:15 #29 CDR -1176 File WriterStatus.cpp, Line 245
Ошибка завершения сессии
14:16:15 #30 TRANSFER -19 File WriterStatus.cpp, Line 245
Невозможно выполнить Fixation
14:16:15 #31 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation
14:16:15 #32 Text 0 File Mmc.cpp, Line 15064
<SONY CD-RW CRX175E2 > start Close Session
14:16:15 #33 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04
14:16:15 #34 CDR -1176 File WriterStatus.cpp, Line 245
Ошибка завершения сессии
14:16:15 #35 TRANSFER -19 File WriterStatus.cpp, Line 245
Невозможно выполнить Fixation
14:16:15 #36 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
14:16:15 #37 Phase 38 File dlgbrnst.cpp, Line 1845
Прожиг завершился неудачей на 12x (1 800 Кб/с)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20.12.2004 21:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29.08.2002 1:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Пробовал разными другими программами рузультат тотже отказываеться писать на разных скоростях и при любых условиях пробовал также менять прошивку в приводе тоже результат 0
Облазил весь www.google.com результат сами понимаете тоже 0
Менял ATAPI драйвер на болие свежую версию не помогает.... |
